dmesg - 2 Cores
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-14-server (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #23~lucid1-Ubuntu SMP Thu Dec 8 14:50:26 UTC 2011 (Ubuntu 3.0.0-14.23~lucid1-server 3.0.9)
[ 0.000000] Command line: root=/dev/md1 ro console=tty0 console=ttyS0,57600
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007df10000 (usable)
[ 0.000000] BIOS-e820: 000000007df10000 - 000000007df16000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007df16000 - 000000007df80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007df80000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fc000000 - 00000000fe000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: FUJITSU SIEMENS D2461-C1 /D2461-C1, BIOS 6.00 R1.11-04.2461.C1 04/19/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7df10 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f7840] f7840
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007df10000
[ 0.000000] 0000000000 - 007de00000 page 2M
[ 0.000000] 007de00000 - 007df10000 page 4k
[ 0.000000] kernel direct mapping tables up to 7df10000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 37617000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7810 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 000000007df12a30 00038 (v01 PTLTD RSDT 00060000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000007df15c8c 00074 (v01 FSC 00060000 000F4240)
[ 0.000000] ACPI: DSDT 000000007df12a68 03224 (v01 FSC D246x 00060000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000007df16fc0 00040
[ 0.000000] ACPI: SSDT 000000007df15d00 00248 (v01 PTLTD POWERNOW 00060000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000007df15f48 00054 (v01 PTLTD ? APIC 00060000 LTP 00000000)
[ 0.000000] ACPI: MCFG 000000007df15f9c 0003C (v01 PTLTD MCFG 00060000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000007df15fd8 00028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007df10000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007df10000
[ 0.000000] NODE_DATA [000000007df0b000 - 000000007df0ffff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007b600000-ffff88007d1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007df10
[ 0.000000] On node 0 totalpages: 515742
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6997 pages used for memmap
[ 0.000000] DMA32 zone: 504763 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7c000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007dc00000 s79680 r8192 d22720 u1048576
[ 0.000000] pcpu-alloc: s79680 r8192 d22720 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 508684
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/md1 ro console=tty0 console=ttyS0,57600
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ e07e000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2008272k/2063424k available (6176k kernel code, 456k absent, 54696k reserved, 6945k data, 904k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2210.420 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.020001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.84 BogoMIPS (lpj=8841680)
[ 0.024004] pid_max: default: 32768 minimum: 301
[ 0.028028] Security Framework initialized
[ 0.032025] AppArmor: AppArmor initialized
[ 0.036004] Yama: becoming mindful.
[ 0.040277] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.049676] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.056549] Mount-cache hash table entries: 256
[ 0.060168] Initializing cgroup subsys cpuacct
[ 0.064010] Initializing cgroup subsys memory
[ 0.068015] Initializing cgroup subsys devices
[ 0.072007] Initializing cgroup subsys freezer
[ 0.076007] Initializing cgroup subsys net_cls
[ 0.080007] Initializing cgroup subsys blkio
[ 0.084015] Initializing cgroup subsys perf_event
[ 0.088037] tseg: 007df80000
[ 0.088040] CPU: Physical Processor ID: 0
[ 0.092008] CPU: Processor Core ID: 0
[ 0.096008] mce: CPU supports 5 MCE banks
[ 0.100017] using AMD E400 aware idle routine
[ 0.105928] ACPI: Core revision 20110413
[ 0.112020] ftrace: allocating 24649 entries in 97 pages
[ 0.120649] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.163784] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01
[ 0.176010] Performance Events: AMD PMU driver.
[ 0.180014] ... version: 0
[ 0.184012] ... bit width: 48
[ 0.188012] ... generic registers: 4
[ 0.192012] ... value mask: 0000ffffffffffff
[ 0.196012] ... max period: 00007fffffffffff
[ 0.200012] ... fixed-purpose events: 0
[ 0.204014] ... event mask: 000000000000000f
[ 0.208351] Booting Node 0, Processors #1 Ok.
[ 0.213626] smpboot cpu 1: start_ip = 99000
[ 0.304094] Brought up 2 CPUs
[ 0.308021] Total of 2 processors activated (8841.25 BogoMIPS).
[ 0.312523] devtmpfs: initialized
[ 0.324216] PM: Registering ACPI NVS region at 7df16000 (434176 bytes)
[ 0.329793] print_constraints: dummy:
[ 0.332052] Time: 7:19:27 Date: 02/15/12
[ 0.336065] NET: Registered protocol family 16
[ 0.340155] node 0 link 0: io port [1000, fffff]
[ 0.340159] TOM: 0000000080000000 aka 2048M
[ 0.344025] node 0 link 0: mmio [fc000000, fdffffff]
[ 0.344028] node 0 link 0: mmio [a0000, bffff]
[ 0.344031] node 0 link 0: mmio [80000000, fe0bffff]
[ 0.344034] bus: [00, ff] on node 0 link 0
[ 0.344037] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.344040] bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
[ 0.344043] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.344055] ACPI: bus type pci registered
[ 0.348082] PCI: MMCONFIG for domain 0000 [bus 00-03] at [mem 0xfc000000-0xfc3fffff] (base 0xfc000000)
[ 0.352024] PCI: MMCONFIG at [mem 0xfc000000-0xfc3fffff] reserved in E820
[ 0.356333] PCI: Using configuration type 1 for base access
[ 0.360887] Trying to unpack rootfs image as initramfs...
[ 0.361005] bio: create slab at 0
[ 0.361761] ACPI: EC: Look up EC in DSDT
[ 0.379984] ACPI: Interpreter enabled
[ 0.380026] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.386866] ACPI: Using IOAPIC for interrupt routing
[ 0.394051] ACPI: No dock devices found.
[ 0.396027] HEST: Table not found.
[ 0.400028] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.404087] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.408145] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.408148] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.408151] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.408154] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.408157] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.408160] pci_root PNP0A03:00: host bridge window [mem 0xfed00000-0xfedfffff] (ignored)
[ 0.408172] pci 0000:00:00.0: [10de:02f0] type 0 class 0x000500
[ 0.408214] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.408242] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.408278] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.408314] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.408351] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.408388] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.408418] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.408458] pci 0000:00:02.0: [10de:02fc] type 1 class 0x000604
[ 0.408479] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408483] pci 0000:00:02.0: PME# disabled
[ 0.408498] pci 0000:00:03.0: [10de:02fd] type 1 class 0x000604
[ 0.408518] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408521] pci 0000:00:03.0: PME# disabled
[ 0.408535] pci 0000:00:05.0: [10de:0241] type 0 class 0x000300
[ 0.408542] pci 0000:00:05.0: reg 10: [mem 0xf1000000-0xf1ffffff]
[ 0.408549] pci 0000:00:05.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.408555] pci 0000:00:05.0: reg 1c: [mem 0xf0000000-0xf0ffffff 64bit]
[ 0.408562] pci 0000:00:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.408600] pci 0000:00:09.0: [10de:0270] type 0 class 0x000500
[ 0.408769] pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601
[ 0.408778] pci 0000:00:0a.0: reg 10: [io 0x8800-0x887f]
[ 0.408806] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.412042] pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05
[ 0.412077] pci 0000:00:0a.1: reg 20: [io 0x88c0-0x88ff]
[ 0.412085] pci 0000:00:0a.1: reg 24: [io 0x8880-0x88bf]
[ 0.412111] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.412117] pci 0000:00:0a.1: PME# disabled
[ 0.412139] pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03
[ 0.412151] pci 0000:00:0b.0: reg 10: [mem 0xf2200000-0xf2200fff]
[ 0.412188] pci 0000:00:0b.0: supports D1 D2
[ 0.412191] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.412195] pci 0000:00:0b.0: PME# disabled
[ 0.412212] pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03
[ 0.412224] pci 0000:00:0b.1: reg 10: [mem 0xf2203000-0xf22030ff]
[ 0.412263] pci 0000:00:0b.1: supports D1 D2
[ 0.412266] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.412270] pci 0000:00:0b.1: PME# disabled
[ 0.412292] pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101
[ 0.412316] pci 0000:00:0d.0: reg 20: [io 0x8c00-0x8c0f]
[ 0.412350] pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101
[ 0.412362] pci 0000:00:0e.0: reg 10: [io 0x8c30-0x8c37]
[ 0.412368] pci 0000:00:0e.0: reg 14: [io 0x8c24-0x8c27]
[ 0.412375] pci 0000:00:0e.0: reg 18: [io 0x8c28-0x8c2f]
[ 0.412381] pci 0000:00:0e.0: reg 1c: [io 0x8c20-0x8c23]
[ 0.412388] pci 0000:00:0e.0: reg 20: [io 0x8c10-0x8c1f]
[ 0.412394] pci 0000:00:0e.0: reg 24: [mem 0xf2201000-0xf2201fff]
[ 0.412430] pci 0000:00:10.0: [10de:026f] type 1 class 0x000604
[ 0.412483] pci 0000:00:14.0: [10de:0268] type 0 class 0x000200
[ 0.412493] pci 0000:00:14.0: reg 10: [mem 0xf2202000-0xf2202fff]
[ 0.412500] pci 0000:00:14.0: reg 14: [io 0x8c38-0x8c3f]
[ 0.412530] pci 0000:00:14.0: supports D1 D2
[ 0.412533] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.412536] pci 0000:00:14.0: PME# disabled
[ 0.412550] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.412570] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.412587] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.412607] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.412633] PCI: peer root bus 00 res updated from pci conf
[ 0.412658] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.416029] pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.416033] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.416037] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.416058] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 0.420028] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.420032] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.420036] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.420087] pci 0000:00:10.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.424031] pci 0000:00:10.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.424035] pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.424039] pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.424042] pci 0000:00:10.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.424045] pci 0000:00:10.0: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.424048] pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.424058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.424129] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT]
[ 0.424161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT]
[ 0.424194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.424278] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.428029] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.432027] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.444282] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.455252] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.462469] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.472516] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.484516] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.496513] ACPI: PCI Interrupt Link [LNKF] (IRQs
[ 0.493672] Freeing initrd memory: 10084k freed
[ 0.500033] 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.510457] ACPI: PCI Interrupt Link [LNKG] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.521474] ACPI: PCI Interrupt Link [LNKH] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.532513] ACPI: PCI Interrupt Link [LNKI] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.545077] ACPI: PCI Interrupt Link [LNKJ] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.556114] ACPI: PCI Interrupt Link [LNKK] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.566600] ACPI: PCI Interrupt Link [LNKL] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.574041] ACPI: PCI Interrupt Link [LNKM] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.586471] ACPI: PCI Interrupt Link [LNKN] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.597297] ACPI: PCI Interrupt Link [LNKO] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.610476] ACPI: PCI Interrupt Link [LNKP] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.623315] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.624049] vgaarb: loaded
[ 0.628039] vgaarb: bridge control possible 0000:00:05.0
[ 0.632312] SCSI subsystem initialized
[ 0.636099] libata version 3.00 loaded.
[ 0.636172] usbcore: registered new interface driver usbfs
[ 0.648055] usbcore: registered new interface driver hub
[ 0.660083] usbcore: registered new device driver usb
[ 0.664102] PCI: Using ACPI for IRQ routing
[ 0.672077] PCI: pci_cache_line_size set to 64 bytes
[ 0.672169] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.672173] reserve RAM buffer: 000000007df10000 - 000000007fffffff
[ 0.676057] NetLabel: Initializing
[ 0.680043] NetLabel: domain hash size = 128
[ 0.688043] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.700058] NetLabel: unlabeled traffic allowed by default
[ 0.721241] AppArmor: AppArmor Filesystem Enabled
[ 0.728085] pnp: PnP ACPI init
[ 0.736068] ACPI: bus type pnp registered
[ 0.744151] pnp 00:00: [bus 00-ff]
[ 0.744155] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.744157] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.744160] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.744162] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.744165] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.744167] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.744170] pnp 00:00: [mem 0xfed00000-0xfedfffff window]
[ 0.744242] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.744551] pnp 00:01: [io 0x0010-0x001f]
[ 0.744554] pnp 00:01: [io 0x0022-0x002d]
[ 0.744556] pnp 00:01: [io 0x0030-0x003f]
[ 0.744558] pnp 00:01: [io 0x0050-0x0053]
[ 0.744561] pnp 00:01: [io 0x0062-0x0063]
[ 0.744563] pnp 00:01: [io 0x0065-0x006f]
[ 0.744565] pnp 00:01: [io 0x0074-0x007f]
[ 0.744568] pnp 00:01: [io 0x0090-0x009f]
[ 0.744570] pnp 00:01: [io 0x00a2-0x00b1]
[ 0.744572] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.744575] pnp 00:01: [io 0x00b4-0x00bf]
[ 0.744577] pnp 00:01: [io 0x00ec-0x00ef]
[ 0.744583] pnp 00:01: [io 0x0072-0x0073]
[ 0.744585] pnp 00:01: [io 0x004e-0x004f]
[ 0.744587] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.744589] pnp 00:01: [io 0x1000-0x107f]
[ 0.744591] pnp 00:01: [io 0x0600-0x067f]
[ 0.744594] pnp 00:01: [io 0xfe00]
[ 0.744596] pnp 00:01: [mem 0xfc000000-0xfdffffff]
[ 0.744598] pnp 00:01: [mem 0xfec00000-0xfecfffff]
[ 0.744600] pnp 00:01: [mem 0xfee00000-0xfeefffff]
[ 0.744701] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.756050] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.768049] system 00:01: [io 0x0600-0x067f] has been reserved
[ 0.780050] system 00:01: [io 0xfe00] has been reserved
[ 0.788052] system 00:01: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.804052] system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.816053] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.832054] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.832067] pnp 00:02: [io 0x0000-0x000f]
[ 0.832069] pnp 00:02: [io 0x0080-0x008f]
[ 0.832072] pnp 00:02: [io 0x00c0-0x00df]
[ 0.832075] pnp 00:02: [dma 4]
[ 0.832113] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.832130] pnp 00:03: [io 0x0070-0x0071]
[ 0.832147] pnp 00:03: [irq 8]
[ 0.832181] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.832196] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.832205] pnp 00:04: [irq 13]
[ 0.832239] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.832251] pnp 00:05: [io 0x0061]
[ 0.832290] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.832349] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (disabled)
[ 0.832366] pnp 00:07: [io 0x0060]
[ 0.832368] pnp 00:07: [io 0x0064]
[ 0.832378] pnp 00:07: [irq 1]
[ 0.832422] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.832468] pnp 00:08: [io 0x0060]
[ 0.832470] pnp 00:08: [io 0x0064]
[ 0.832479] pnp 00:08: [irq 12]
[ 0.832521] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.832786] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.832796] pnp 00:09: [irq 4]
[ 0.832865] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.832904] pnp: PnP ACPI: found 10 devices
[ 0.840054] ACPI: ACPI bus type pnp unregistered
[ 0.857396] Switching to clocksource acpi_pm
[ 0.864106] PCI: max bus depth: 1 pci_try_num: 2
[ 0.864135] pci 0000:00:05.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ 0.866091] Switched to NOHz mode on CPU #0
[ 0.886935] Switched to NOHz mode on CPU #1
[ 0.895327] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.905785] pci 0000:00:02.0: bridge window [io disabled]
[ 0.917108] pci 0000:00:02.0: bridge window [mem disabled]
[ 0.928430] pci 0000:00:02.0: bridge window [mem pref disabled]
[ 0.940620] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 0.951077] pci 0000:00:03.0: bridge window [io disabled]
[ 0.962399] pci 0000:00:03.0: bridge window [mem disabled]
[ 0.973722] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 0.985913] pci 0000:00:10.0: PCI bridge to [bus 04-04]
[ 0.996369] pci 0000:00:10.0: bridge window [io disabled]
[ 1.007694] pci 0000:00:10.0: bridge window [mem disabled]
[ 1.019017] pci 0000:00:10.0: bridge window [mem pref disabled]
[ 1.031216] pci 0000:00:02.0: setting latency timer to 64
[ 1.031221] pci 0000:00:03.0: setting latency timer to 64
[ 1.031226] pci 0000:00:10.0: setting latency timer to 64
[ 1.031230] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 1.031233] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 1.031236] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.031239] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 1.031241] pci_bus 0000:04: resource 5 [mem 0x80000000-0xfcffffffff]
[ 1.031244] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.031292] NET: Registered protocol family 2
[ 1.040139] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.055451] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.073129] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.087099] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.100337] TCP reno registered
[ 1.106647] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.118691] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.131715] NET: Registered protocol family 1
[ 1.140499] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.151496] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.162478] pci 0000:00:05.0: Boot video device
[ 1.420096] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 1.431124] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 1.442118] PCI: CLS 64 bytes, default 64
[ 1.443717] Simple Boot Flag at 0x36 set to 0x80
[ 1.453330] audit: initializing netlink socket (disabled)
[ 1.464143] type=2000 audit(1329290366.460:1): initialized
[ 1.505943] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.537315] VFS: Disk quotas dquot_6.5.2
[ 1.545244] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.558976] fuse init (API version 7.16)
[ 1.566986] msgmni has been set to 3942
[ 1.575273] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.590120] io scheduler noop registered
[ 1.597987] io scheduler deadline registered (default)
[ 1.608329] io scheduler cfq registered
[ 1.616217] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.616247] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.616355] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.616375] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
[ 1.616458] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.627652] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.641040] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.657402] ACPI: Power Button [PWRB]
[ 1.664802] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.679600] ACPI: Power Button [PWRF]
[ 1.686970] ACPI: acpi_idle registered with cpuidle
[ 1.688427] ERST: Table is not found!
[ 1.729051] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.798523] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.810046] hpet_acpi_add: no address or irqs in _CRS
[ 1.820182] Linux agpgart interface v0.103
[ 1.829826] brd: module loaded
[ 1.836648] loop: module loaded
[ 1.843380] pata_acpi 0000:00:0d.0: setting latency timer to 64
[ 1.843478] pata_acpi 0000:00:0e.0: enabling device (0005 -> 0007)
[ 1.856072] ACPI: PCI Interrupt Link [LNKN] enabled at IRQ 23
[ 1.867585] pata_acpi 0000:00:0e.0: PCI INT A -> Link[LNKN] -> GSI 23 (level, high) -> IRQ 23
[ 1.884649] pata_acpi 0000:00:0e.0: setting latency timer to 64
[ 1.884658] pata_acpi 0000:00:0e.0: PCI INT A disabled
[ 1.895493] Fixed MDIO Bus: probed
[ 1.902347] PPP generic driver version 2.4.2
[ 1.910951] tun: Universal TUN/TAP device driver, 1.6
[ 1.921061] tun: (C) 1999-2004 Max Krasnyansky
[ 1.933536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.946803] ACPI: PCI Interrupt Link [LNKI] enabled at IRQ 22
[ 1.958314] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LNKI] -> GSI 22 (level, high) -> IRQ 22
[ 1.975206] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 1.975209] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 1.985752] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 2.000578] ehci_hcd 0000:00:0b.1: debug port 1
[ 2.009662] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 2.009691] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xf2203000
[ 2.032029] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 2.043675] hub 1-0:1.0: USB hub found
[ 2.051193] hub 1-0:1.0: 8 ports detected
[ 2.059347] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.071937] ACPI: PCI Interrupt Link [LNKJ] enabled at IRQ 21
[ 2.083452] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LNKJ] -> GSI 21 (level, high) -> IRQ 21
[ 2.100337] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 2.100340] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 2.110853] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 2.125680] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xf2200000
[ 2.194140] hub 2-0:1.0: USB hub found
[ 2.201666] hub 2-0:1.0: 8 ports detected
[ 2.209808] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.222612] i8042: PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.242041] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.251981] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.262177] mousedev: PS/2 mouse device common for all mice
[ 2.273466] rtc_cmos 00:03: RTC can wake from S4
[ 2.282827] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.295048] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 2.306842] device-mapper: uevent: version 1.0.3
[ 2.316185] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 2.333067] cpuidle: using governor ladder
[ 2.341270] cpuidle: using governor menu
[ 2.349127] EFI Variables Facility v0.08 2004-May-17
[ 2.359335] TCP cubic registered
[ 2.365954] NET: Registered protocol family 10
[ 2.375511] NET: Registered protocol family 17
[ 2.384432] Registering the dns_resolver key type
[ 2.393985] PM: Hibernation image not present or could not be loaded.
[ 2.393998] registered taskstats version 1
[ 2.418030] Magic number: 0:114:319
[ 2.425422] tty tty44: hash matches
[ 2.432555] rtc_cmos 00:03: setting system clock to 2012-02-15 07:19:29 UTC (1329290369)
[ 2.448745] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2 cpu cores) (version 2.20.00)
[ 2.468951] powernow-k8: fid 0xf (2300 MHz), vid 0xa
[ 2.478886] powernow-k8: fid 0xe (2200 MHz), vid 0xb
[ 2.488823] powernow-k8: fid 0xc (2000 MHz), vid 0xd
[ 2.498759] powernow-k8: fid 0xa (1800 MHz), vid 0xf
[ 2.508697] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 2.519101] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.531119] EDD information not available.
[ 2.541195] Freeing unused kernel memory: 904k freed
[ 2.551600] Write protecting the kernel read-only data: 12288k
[ 2.570128] Freeing unused kernel memory: 1996k freed
[ 2.586231] Freeing unused kernel memory: 1396k freed
[ 2.618395] udev: starting version 151
[ 2.626216] udevd (109): /proc/109/oom_adj is deprecated, please use /proc/109/oom_score_adj instead.
[ 2.694746] sata_nv 0000:00:0e.0: version 3.5
[ 2.694765] sata_nv 0000:00:0e.0: PCI INT A -> Link[LNKN] -> GSI 23 (level, high) -> IRQ 23
[ 2.714901] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 2.724547] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 2.737178] scsi0 : sata_nv
[ 2.745437] scsi1 : sata_nv
[ 2.751319] ata1: SATA max UDMA/133 cmd 0x8c30 ctl 0x8c24 bmdma 0x8c10 irq 23
[ 2.765599] ata2: SATA max UDMA/133 cmd 0x8c28 ctl 0x8c20 bmdma 0x8c18 irq 23
[ 2.780033] pata_amd 0000:00:0d.0: version 0.4.1
[ 2.780085] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 2.780410] scsi2 : pata_amd
[ 2.787555] scsi3 : pata_amd
[ 2.793819] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x8c00 irq 14
[ 2.807744] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x8c08 irq 15
[ 2.821971] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.836752] ACPI: PCI Interrupt Link [LNKL] enabled at IRQ 20
[ 2.848277] forcedeth 0000:00:14.0: PCI INT A -> Link[LNKL] -> GSI 20 (level, high) -> IRQ 20
[ 2.865329] forcedeth 0000:00:14.0: setting latency timer to 64
[ 3.248033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.315123] ata1.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133
[ 3.326454] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.381065] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:99:0d:ce:a0
[ 3.390095] ata1.00: configured for UDMA/133
[ 3.390198] scsi 0:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5
[ 3.390390] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.391365] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.391415] sd 0:0:0:0: [sda] Write Protect is off
[ 3.391418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.391440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.439268] sda: sda1 sda2 sda3
[ 3.481978] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 3.483475] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.712540] md: bind
[ 3.724611] md: bind
[ 3.856053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.902933] ata2.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133
[ 3.914258] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.969564] ata2.00: configured for UDMA/133
[ 3.978271] scsi 1:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5
[ 3.994654] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.994755] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.994804] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.994807] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.994828] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.035212] sdb: sdb1 sdb2 sdb3
[ 4.054494] ata4: port disabled. ignoring.
[ 4.054594] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.068439] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 4.084485] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 4.105467] md: raid1 personality registered for level 1
[ 4.119947] md: linear personality registered for level -1
[ 4.133032] md: multipath personality registered for level -4
[ 4.146602] md: raid0 personality registered for level 0
[ 4.161156] async_tx: api initialized (async)
[ 4.236032] raid6: int64x1 1871 MB/s
[ 4.308022] raid6: int64x2 2584 MB/s
[ 4.380030] raid6: int64x4 1702 MB/s
[ 4.452022] raid6: int64x8 1686 MB/s
[ 4.524029] raid6: sse2x1 3206 MB/s
[ 4.596025] raid6: sse2x2 4283 MB/s
[ 4.668025] raid6: sse2x4 4453 MB/s
[ 4.675534] raid6: using algorithm sse2x4 (4453 MB/s)
[ 4.686200] xor: automatically using best checksumming function: generic_sse
[ 4.720017] generic_sse: 7198.000 MB/sec
[ 4.728572] xor: using function: generic_sse (7198.000 MB/sec)
[ 4.741400] md: raid6 personality registered for level 6
[ 4.752072] md: raid5 personality registered for level 5
[ 4.762709] md: raid4 personality registered for level 4
[ 4.779776] md: raid10 personality registered for level 10
[ 4.866735] md: bind
[ 4.872413] md: bind
[ 4.879593] bio: create slab at 1
[ 4.887762] md/raid1:md3: active with 2 out of 2 mirrors
[ 4.898421] md3: detected capacity change from 0 to 244043939840
[ 4.911014] md/raid1:md1: active with 2 out of 2 mirrors
[ 4.921691] md1: detected capacity change from 0 to 4005560320
[ 4.923757] md3: unknown partition table
[ 4.954999] md1: unknown partition table
[ 5.808050] floppy0: no floppy controllers found
[ 10.031649] EXT3-fs: barriers not enabled
[ 10.050675] kjournald starting. Commit interval 5 seconds
[ 10.050713] EXT3-fs (md1): mounted filesystem with ordered data mode
[ 10.957053] Adding 1959924k swap on /dev/sda2. Priority:-1 extents:1 across:1959924k
[ 10.976301] Adding 1959924k swap on /dev/sdb2. Priority:-2 extents:1 across:1959924k
[ 10.993356] EXT3-fs (md1): using internal journal
[ 11.005273] udev: starting version 151
[ 11.741623] lp: driver loaded but no devices found
[ 11.870825] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 11.872480] SGI XFS Quota Management subsystem
[ 11.879214] ppdev: user-space parallel port driver
[ 11.879598] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 11.889606] MCE: In-kernel MCE decoding enabled.
[ 11.915075] i2c i2c-0: nForce2 SMBus adapter at 0x88c0
[ 11.915103] i2c i2c-1: nForce2 SMBus adapter at 0x8880
[ 11.928985] XFS (dm-0): Mounting Filesystem
[ 11.931454] EDAC MC: Ver: 2.1.0
[ 11.965296] wmi: Mapper loaded
[ 11.970911] AMD64 EDAC driver v3.4.0
[ 11.971020] EDAC amd64: DRAM ECC disabled.
[ 11.971027] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 11.971029] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 11.971031] (Note that use of the override may cause unknown side effects.)
[ 12.067578] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[ 12.067690] NV_TCO: Watchdog reboot not detected.
[ 12.067798] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 12.108348] type=1400 audit(1329290379.172:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=579 comm="apparmor_parser"
[ 12.108369] type=1400 audit(1329290379.172:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=580 comm="apparmor_parser"
[ 12.108619] type=1400 audit(1329290379.172:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=579 comm="apparmor_parser"
[ 12.108648] type=1400 audit(1329290379.172:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=580 comm="apparmor_parser"
[ 12.108777] type=1400 audit(1329290379.172:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=579 comm="apparmor_parser"
[ 12.108813] type=1400 audit(1329290379.172:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=580 comm="apparmor_parser"
[ 12.143576] [drm] Initialized drm 1.1.0 20060810
[ 12.509212] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 19
[ 12.509240] nouveau 0000:00:05.0: PCI INT A -> Link[LNKG] -> GSI 19 (level, high) -> IRQ 19
[ 12.509246] nouveau 0000:00:05.0: setting latency timer to 64
[ 12.510556] [drm] nouveau 0000:00:05.0: Detected an NV40 generation card (0x04e000a2)
[ 12.511794] [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN
[ 12.549163] [drm] nouveau 0000:00:05.0: ... appears to be valid
[ 12.549167] [drm] nouveau 0000:00:05.0: BIT BIOS found
[ 12.549170] [drm] nouveau 0000:00:05.0: Bios version 05.51.28.39
[ 12.549175] [drm] nouveau 0000:00:05.0: TMDS table version 1.1
[ 12.549177] [drm] nouveau 0000:00:05.0: TMDS table script pointers not stubbed
[ 12.549180] [drm] nouveau 0000:00:05.0: BIT table 'd' not found
[ 12.549183] [drm] nouveau 0000:00:05.0: Found Display Configuration Block version 3.0
[ 12.549186] [drm] nouveau 0000:00:05.0: Raw DCB entry 0: 02000300 00000023
[ 12.549191] [drm] nouveau 0000:00:05.0: Raw DCB entry 1: 03011312 00000000
[ 12.549195] [drm] nouveau 0000:00:05.0: DCB connector table: VHER 0x30 5 10 2
[ 12.549198] [drm] nouveau 0000:00:05.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[ 12.549201] [drm] nouveau 0000:00:05.0: 1: 0x00000131: type 0x31 idx 1 tag 0xff
[ 12.549204] [drm] nouveau 0000:00:05.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 12.549207] [drm] nouveau 0000:00:05.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 12.549210] [drm] nouveau 0000:00:05.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 12.549217] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xDC75
[ 12.549281] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xDDCC
[ 12.549284] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xDDCD
[ 12.549578] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xDF4F
[ 12.549583] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xDF98
[ 12.549592] [drm] nouveau 0000:00:05.0: timingset 255 does not exist
[ 12.915529] XFS (dm-0): Ending clean mount
[ 13.028067] [drm] nouveau 0000:00:05.0: 1 available performance level(s)
[ 13.028074] [drm] nouveau 0000:00:05.0: 0: memory 0MHz core 425MHz fanspeed 100%
[ 13.028082] [drm] nouveau 0000:00:05.0: c: memory 0MHz
[ 13.028209] [TTM] Zone kernel: Available graphics memory: 1011326 kiB.
[ 13.028211] [TTM] Initializing pool allocator.
[ 13.028229] [drm] nouveau 0000:00:05.0: Detected 32MiB VRAM
[ 13.029700] [drm] nouveau 0000:00:05.0: 64 MiB GART (aperture)
[ 13.029767] [drm] nouveau 0000:00:05.0: Saving VGA fonts
[ 13.066916] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.066918] [drm] No driver support for vblank timestamp query.
[ 13.067453] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 13.067457] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 13.120349] No connectors reported connected with modes
[ 13.120355] [drm] Cannot find any crtc or sizes - going 1024x768
[ 13.120640] [drm] nouveau 0000:00:05.0: allocated 1024x768 fb: 0x49000, bo ffff880077a1a400
[ 13.120771] fbcon: nouveaufb (fb0) is primary device
[ 13.125267] Console: switching to colour frame buffer device 128x48
[ 13.126253] fb0: nouveaufb frame buffer device
[ 13.126255] drm: registered panic notifier
[ 13.126267] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:05.0 on minor 0
[ 13.242877] XFS (dm-1): Mounting Filesystem
[ 13.481654] XFS (dm-1): Ending clean mount
[ 13.548183] XFS (dm-2): Mounting Filesystem
[ 13.668359] XFS (dm-2): Ending clean mount
[ 14.112198] type=1400 audit(1329290381.176:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=802 comm="apparmor_parser"
[ 14.112471] type=1400 audit(1329290381.176:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=802 comm="apparmor_parser"
[ 14.112633] type=1400 audit(1329290381.176:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=802 comm="apparmor_parser"
[ 14.125003] type=1400 audit(1329290381.188:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=803 comm="apparmor_parser"
[ 14.832053] floppy0: no floppy controllers found
[ 23.584019] eth0: no IPv6 routers present